Prefabricated Light Steel Building Aircraft Hangar Light Weight With Good Stiffness

High-quality characteristics: prefabricated light steel structure warehouse hangar building materials

In the early days, the size of the aircraft was small, and the requirements for parking space were relatively simple, and the steel structure hangar began to emerge with the advantages of convenient construction and open space. With the rapid development of the aviation industry, the size of the aircraft continues to increase, the number continues to increase, there is a higher demand for hangar space and strength, the steel structure with the characteristics of high strength and easy extension, through the use of thicker, better performance steel and innovative structural design, to adapt to the parking and maintenance of large aircraft. Nowadays, driven by science and technology, new steel products continue to emerge, fire prevention, rust prevention and other properties have been greatly improved, digital design and construction technology makes the construction of steel structure hangars more accurate and efficient, can better meet the complex and diverse use scenarios of modern aviation, and will continue to move towards intelligent and green environmental protection in the future.

Material Category	Specific Material	Specification	Quantity	Purpose
Main Structure Steel	H-shaped Steel	Section dimensions determined by design calculation, such as common 400mm×200mm×8mm×13mm, etc.	Determined according to the scale and structural design of the aircraft hangar	Form the main load-bearing frame of the aircraft hangar, such as steel columns and steel beams
	Channel Steel	For example, 10# channel steel (height 100mm, leg width 48mm, waist thickness 5.3mm)	Several	Used for supporting and connecting part of the structure to enhance overall stability
	Angle Steel	Common ∠50×50×5mm, etc.	Appropriate amount	Used for joint connection, stiffening and other parts
	Round Steel	Such as diameter 20mm, etc.	As required	Can be used as auxiliary structural components such as tie rods
Roof Materials	Color Steel Plate	Thickness is generally 0.5mm - 0.8mm, width is about 1m	Calculated according to the roof area	As the roof covering layer, playing the role of waterproofing and heat preservation
	Thermal Insulation Cotton	Thickness 50mm - 100mm, bulk density 12kg/m³ - 16kg/m³	Determined according to the roof area and heat preservation requirements	Filled in the roof structure to improve the heat insulation performance
	Self-tapping Screws	Diameter 4.8mm - 6.3mm, length determined according to the thickness of the plate and connection requirements	A large number	Used to fix color steel plates and related accessories
Wall Materials	Color Steel Plate	Similar to the specifications of the roof color steel plate	Calculated according to the wall area	Form the walls of the aircraft hangar
	Thermal Insulation Cotton	The same as the roof thermal insulation cotton	Determined according to the wall area and heat preservation requirements	Wall insulation
	Doors and Windows	Aluminum alloy doors and windows or steel doors and windows	Customized according to the design size	As required
	Sealing Rubber Strips	Adapt to the size of doors and windows	Appropriate amount	Used for door and window sealing to prevent rainwater leakage and air penetration
Connection Materials	High-strength Bolts	M16 - M30 and other specifications	Calculated according to the number of connection nodes	Used for the connection of the main frame of the steel structure to ensure the connection strength
	Ordinary Bolts	M8 - M12 and other specifications	A large number	Used for auxiliary connection and fixing of some components
	Welding Materials	Such as E4303 welding electrodes (used for welding Q235 steel)	Determined according to the welding workload	Used for steel welding connection
Fireproof Materials	Fireproof Coating	Thin or thick type, selected according to the fire protection grade requirements	Calculated according to the surface area of the steel structure	Painted on the surface of the steel structure to improve fire protection performance

​

The advantages of steel structure buildings include:

1. Strength and durability: Steel is a highly durable material that can withstand extreme weather conditions such as hurricanes, earthquakes, and heavy snow loads. It has a high strength-to-weight ratio, allowing it to support large spans and heavy loads.

2. Rapid construction: The steel structure can be prefabricated in the factory and then quickly assembled on site, which greatly shortens the construction time compared with the traditional construction method. This results in cost savings and faster project completion.

3. Design flexibility: Steel has greater design flexibility due to its strength and versatility. It can be easily shaped and molded into a variety of architectural forms, allowing architects and designers to create unique and aesthetically pleasing structures.

4. Cost-effective: While the initial cost of steel structures may be higher than other building materials, they provide long-term cost-effectiveness. Compared to many other building materials, steel requires minimal maintenance, is resistant to pests and rot, and lasts longer.

Our advantages

★Superior material performance: The steel we produce has high strength and good toughness, and the steel structure products made of it are of reliable quality and can withstand large loads, such as in large industrial plants, which can easily carry heavy equipment.

★Strict quality control: The factory has established a standardized quality management process, from raw material procurement to component processing and assembly, all links are strictly controlled to ensure stable product quality and improve yield.

★Technological innovation promotion: Continuously introduce new technologies and new equipment, such as advanced cutting and welding equipment and information management systems, to improve the degree of production automation, improve production efficiency and quality stability.

★Flexible space design: It can realize large-span and complex space structure design to meet different building functions and space needs, such as airport terminals, large stadiums and other open space buildings.

Choosing our steel structure storage products is to choose professionalism, quality, efficiency and value. We look forward to working with you to create exceptional construction projects.

Company Profile

China CT Steel Structure Co.,Ltd of BY GROUP is a comprehensive industrial group integrating for steel structure design, manufacture and installation. We have estabulished over 21 years.The factory covers an area of 30 hectares.

Main products: steel structural warehouse, workshop, high rise steel building, school, hotel,office building, exhibition building, show room, shopping mall, stadium,Agricultural project (stable/cattle barn, poultry house,pig house), car parking, hangar,shed,storage room, prefab house, container house, Sandwich panel,corrugated steel sheet, C&Z sec- tion steel, door and windows and cranes.

Packing: we pack all the parts on the steel pallet and push into the container when clients received they can pulling them out within half an hour. It can help our clients to save a lot of time and labor cost during unloading.

Container loading; We will supply the materials list, the packing lists based on the contents we loaded into container. Showing the quantity, part no. length, container no, seal no.after finishing the container loading.

"Quality and service first "is our company's development goals. We hope we will develop together and win more projects together!

Packaging & Shipping

1. All standard components are packed in plywood box.
2. All steel structure weld components are packed with blanket or bubble-wrap to avoid scratch during loading and unloading.
3. All steel structure are packed in steel pallet together into container, much save loading and unloading time, labor cost.
4. All sandwich panel are packed in steel pallet.
5. Material components will be made container load plan, also make regional unloading plan to avoid retransport on site.
6. All equipment pasted with English lable
7. Small equipment will packed in carton or plywood box

FAQ

Q: Are you a factory or trading company?
A: We are a manufacturing factory, we can provide one-stop service for customers. You can get the best service and competitive prices.

Q: How can I get a quote for a project?
A: You can contact us via email, phone, Trade Messenger, WhatsApp, Skype, Viber, etc., and we will get back to you as soon as possible.

Q: Do you accept container loading inspections?
A: You are welcome to send inspectors to visit the factory, not only at the time of loading, but also at any time. If it's not convenient, we also provide real-time video display.

Q: Do you provide design services?
A: Yes, we can design complete solution drawings according to your requirements. They use software such as Auto CAD, PKPM, MTS, 3D3S, etc.

Q: What's the payment terms?
A: Payment terms: T/T, L/C, other payment methods can be negotiable

Q: What's the delivery time?
A: The delivery time depends on the order quantity.